Game Boy Color Backlight LCD TFT

Por un escritor de hombre misterioso

€ 34.99

4.5 (105) En stock

A drop-in Nintendo Game Boy Color Backlight. Use this drop-in kit to easily to upgrade your Game Boy Color with no shell trimming required! Pair with a custom glass lens and spacers. Works with Neo Geo Pocket Color.
Hand Held Legend bring you modern mods for your favorite retro consoles. From the Nintendo Game Boy to the Nintendo Switch, modding is for every generation!
An easy to use drop-in kit to upgrade your Game Boy Color! FEATURES: Display is transflective, meaning it works wonderfully in direct light. No shell modification required. Beautiful LCD with backlight. Soldering not required. 5 level touch brightness control. Double sided foam adhesive is not required and is meant to help center LCD if not using spacers. We recommend using the included 'TFT brackets' instead of the 'acrylic spacers'. INCLUDED: 1x TFT LCD 1x PCB 1x Set of TFT brackets 1x Set of acrylic spacers 1x Adhesive 2x Insulating film 1x Ribbon 1x Touch sensor ribbon PAIRS WELL WITH: Game Boy Color TFT Screen Lens - Glass Game Boy CleanAmp v1.1 Audio Amplifier Game Boy Color Replacement Shell DOCUMENTATION: Install Guide Install Video How to test your LCD kit NOTES: The display area on the LCD is slightly smaller than the original so a TFT lens must be used to mask properly. Foam adhesive is not required if using either spacer set. You may use either 3D printed spacers or acrylic spacers depending on preference. After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance. The touch sensor can be placed near the top of the console near the IR data transfer window. WARNINGS: Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return. LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.