Electroválvula ST-SB 1/4'' NO latón FKM 0-10bar 12V CC

Comprar una válvula de solenoide ST-SB 1/4'' NO latón FKM 0-10bar 12V DC en línea de Tameson hoy. Envío el mismo Día con opciones de envío global.
Válvula solenoide de 2 vías JP Fluid Control (tipo ST-SB) con roscas G 1/4 pulgadas y una bobina de 12 V CC. La función de circuito de la electroválvula es normalmente abierta (tensión = cierre) y de funcionamiento semidirecto, por lo que no se requiere diferencial de presión. Adecuado para una temperatura máxima del medio de 120° C (248 ° F) y un rango de presión de 0 - 10 bar (0 - 145 psi). Cuerpo de latón con junta de FKM (FPM) y orificio de 10,5 mm. El valor Kv es de 1,25 m3/h (20,84 l/min a dp=1 bar de agua).

U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4 inch) female threaded (NPT) connections, and heat and oil resistant Viton seals. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.

U.S. Solid 1/4 inch NPT Brass Electric Solenoid Valve DC 12V Viton Direct Normally Closed

Solenoid Valve ST-SA 1/4 brass FKM 0-10bar 12V DC

Most reliable 12V DC ASCO, SMC & ODE Valves with full warranty against any manufacturing defects.

Shut-off Valve, 12V DC solenoid, 1/4 female NPT ports, normally closed, TEFLON SEALS, 150 PSI operating - Kinsler Fuel Injection

Automatic Transmission AT Kickdown Solenoid Valve Body Module Auto Transmission valve body with solenoids for Aud-i VW Jetta Golf Passat Touran Sharan

JP Fluid Control 2 way solenoid valve (type ST-SA) with G 1/2 inch threads and a 12 V DC coil. The circuit function of the solenoid valve is normally closed (voltage = open) and semi-direct operating, so no pressure differential is required. Suitable for max media temperature of 130° C (266 ° F) pressure range of 0 - 10 bar (0 - 145 psi). Housing of brass with EPDM sealing and a 10.5 mm orifice. The Kv-value is 1.49 m3/h (24.84 l/min at dp=1 bar water).

Solenoid Valve - G 1/2 inch - 12 V DC - Normally Closed - Brass - FKM - 10.5 mm Valve Bore - 10 Bar

1/4 12V DC SS Stainless Steel Electric Solenoid Valve 12 Volts

U.S. Solid Electric Solenoid Valve- 1/4 12V DC Solenoid Valve Brass Body Normally Closed, VITON SEAL - U.S. Solid

备件清单861_厦门纪扬科技有限公司

U.S. Solid 1/4 Brass Electric Solenoid Valve 12V DC Normally Closed VITON Air Water Oil Fuel : Industrial & Scientific

Shut-off Valve, 12V DC solenoid, 1/4 female NPT ports, normally closed, TEFLON SEALS, 150 PSI operating - Kinsler Fuel Injection

U.S. Solid 1/4 Brass Electric Solenoid Valve 12V DC Normally Closed VITON Air Water Oil Fuel : Industrial & Scientific

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects. 1/4 Brass direct acting with NBR gasket.

U.S. Solid 1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open (Air, Water.)

Solenoid Valve ST-SB 1/4'' NO brass FKM 0-10bar 12V DC

Hydraulic Pneumatic Control parts and devices HPControl

Electroválvula DF-SB 3/4 NO latón FKM 0-3bar 12V DC

ELECTROVÁLVULA DE PLÁSTICO 12V 1/2 NC INTERRUPTOR DE FLUJO

Electroválvula Solenoide De Plástico De 1/2 Pulgada 12v 1a

5819.12 - ELECTROVALVULA 12V - CARTHAGO RECAMBIOS SL