XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Mal - Custom Cable Connection

Custom Cable Connection microphone cables are a great choice for custom "pro" audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires wit
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors

Assembled in Dallas, TX by Custom Cable Connection

Pinout

Tip : Red

Ring : Blue

Shield : Shield

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

Typical Applications:

Audio connections between multimedia devices.

Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.

Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

Features:

2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire

3.5mm Male Stereo Solder Plug, Nickel plated with strain relief

1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR Male Plug to XLR Female Jack

Rugged Nickel Plated XLR Connectors with Strain Relief

Neutrik NC3MXX and NC3FXX Connectors

Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Neutrik Connectors: NP3RX and NYS228

Assembled in Dallas, TX by Custom Cable Connection

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR 3 Pin to 3 Bare Wires

Connector Options: Male (31096) or Female (31095)

Rugged Nickel Plated XLR Connectors with Strain Relief

Pinout

Pin 1- Shield

Pin 2- Red

Pin 3- Blue

4 Pole Speaker Box Female D Series Heavy Duty Chassis Panel Mount Conn – RiteAV

XLR Cables 3ft/1M 2 Packs, Premium Heavy Duty Balanced Microphone Cable with 3-Pin XLR Male to Female Microphone Cord Connector Compatible with Microphones,Mixer,Speaker Systems,Preamps and More : Musical Instruments

AV Wiring – RCI Custom

75 Foot PPro Audio Balanced Neutrik NC3MXX XLR Male to Male Plenum Cable by Custom Cable Connection - White : Musical Instruments

Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or

XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Male or Female Options)

6 Inch 3 Pin XLR Female to Blunt Economy Cable by Custom Cable Connection : Musical Instruments

Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or

XLR 3 Pin Female to Blunt Install Cable

Custom Cable Connection 1 Foot Pro-Audio XLR Balanced Microphone Male to Blunt Economy 18 AWG Cable : Musical Instruments

Neewer 20-Piece 3 Pin XLR Solder Type Connector - 10 male and 10 Female Plug Cable Connector Microphone Audio Socket, Made of Zinc Alloy for High

Why do you have to use the DMX terminator? - PropAudio

Custom Cables 3-Pin XLR-XLR Microphone Cable Made from Mogami W2549 & Neutrik Connectors

XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Mal - Custom Cable Connection

Elite Core Powered Speaker Cable XLR+AC - Elite Core

Cable Matters (1/8 Inch) 3.5mm to XLR Cable 6 ft Male to Male (XLR to 3.5mm Cable, XLR to 1/8 Cable, 1/8 to XLR Cable)

Stagg High Quality Line Cable 1m XLR Female to 1/4 Male Jack Black

Cable XLR

Cable de Micro Neutrik de XLR hembra a Jack 3,5 mm estéreo - RADIO